The cold metal sheet forming is a metalworking procedure, aiming to get a metal sheet plastically deformed. The forming step represents the phase most susceptible to issues, for the sheet that is getting deformed. For this reason, a control system requires to monitor the metal sheet deformation during the forming step in order to improve the work-piece quality. To date, mostly of the common Process Control approaches for the metal forming process are PID-based and consider the forming process modelled by a linear 1st-order derivative differential relationship between the binder force (input) and the punch force (output). The five-steps methodology proposed in this thesis, gives a novel approach both for the cold metal sheet forming process, and for the process controller. To this aim, a 2nd-order nonlinear Hammerstein-Wiener model is used to represent the nonlinear relationship between the binder force (input) and the metal sheet draw-in at varies locations (output). According to the process control, both a Differential PID-based controller and a Model Predictive-based Controller are designed for the Single Input Multiple Output (SIMO) system representing the process. Moreover, a Software-in-the-loop (SIL) real-time simulation OPC UA-based is also considered to simulate the behaviour of the cold metal sheet forming process when a Programmable Logic Controller (PLC) is used to perform the control algorithm. Finally, a real case study for a “T-shaped” metal sheet is considered to apply the proposed methodology, and a results comparison between the different controllers is given.
DESIGN AND TEST OF REAL-TIME CONTROL SYSTEMS FOR THE COLD METAL SHEET FORMING PROCESS IN THE AUTOMOTIVE SECTOR
BOZZA, AUGUSTO
2019/2020
Abstract
The cold metal sheet forming is a metalworking procedure, aiming to get a metal sheet plastically deformed. The forming step represents the phase most susceptible to issues, for the sheet that is getting deformed. For this reason, a control system requires to monitor the metal sheet deformation during the forming step in order to improve the work-piece quality. To date, mostly of the common Process Control approaches for the metal forming process are PID-based and consider the forming process modelled by a linear 1st-order derivative differential relationship between the binder force (input) and the punch force (output). The five-steps methodology proposed in this thesis, gives a novel approach both for the cold metal sheet forming process, and for the process controller. To this aim, a 2nd-order nonlinear Hammerstein-Wiener model is used to represent the nonlinear relationship between the binder force (input) and the metal sheet draw-in at varies locations (output). According to the process control, both a Differential PID-based controller and a Model Predictive-based Controller are designed for the Single Input Multiple Output (SIMO) system representing the process. Moreover, a Software-in-the-loop (SIL) real-time simulation OPC UA-based is also considered to simulate the behaviour of the cold metal sheet forming process when a Programmable Logic Controller (PLC) is used to perform the control algorithm. Finally, a real case study for a “T-shaped” metal sheet is considered to apply the proposed methodology, and a results comparison between the different controllers is given.I documenti in UNITESI sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/20.500.14253/96489