This thesis focuses on the valorization of industrial waste - in particular: marble scraps and sediments dredged from water basins - to develop sustainable cement conglomerates. After the characterization of the waste under experimentation, experimental mix designs were developed with (partial or total) replacement of the aggregates. Rheological analyses, flexural and compressive strength tests and microstructural investigations have highlighted that, with an optimization of the dosages, it is possible to obtain mortars with good mechanical performances. In particular, sediments with sandy characteristics offer higher resistances than clayey ones, while an excessive presence of marble can compromise the cohesion of the material. The results demonstrate the potential of industrial waste for the production of low environmental impact building materials, contributing to the transition towards a more sustainable building model.

La presente tesi si concentra sulla valorizzazione degli scarti industriali – in particolare: sfridi di marmo e sedimenti dragati da bacini idrici – per sviluppare conglomerati cementizi sostenibili. Successivamente alla caratterizzazione dei rifiuti oggetto di sperimentazione, sono stati sviluppati mix design sperimentali con sostituzione (parziale o totale) degli aggregati. Le analisi reologiche, le prove di resistenza a flessione e compressione e le indagini microstrutturali hanno evidenziato che, con un’ottimizzazione dei dosaggi, è possibile ottenere malte con buone prestazioni meccaniche. In particolare, i sedimenti con caratteristiche sabbiose offrono resistenze superiori rispetto a quelli argillosi, mentre un’eccessiva presenza di marmettola può compromettere la coesione del materiale. I risultati dimostrano il potenziale dei rifiuti industriali per la realizzazione di materiali da costruzione a basso impatto ambientale, contribuendo alla transizione verso un modello edilizio più sostenibile.

VALORIZZAZIONE DI SCARTI INDUSTRIALI IN MATERIALI PER L'EDILIZIA SOSTENIBILE: CONGLOMERATI CEMENTIZI A BASE DI SFRIDI DI MARMO

ANGARANO, GIUSEPPE
2023/2024

Abstract

This thesis focuses on the valorization of industrial waste - in particular: marble scraps and sediments dredged from water basins - to develop sustainable cement conglomerates. After the characterization of the waste under experimentation, experimental mix designs were developed with (partial or total) replacement of the aggregates. Rheological analyses, flexural and compressive strength tests and microstructural investigations have highlighted that, with an optimization of the dosages, it is possible to obtain mortars with good mechanical performances. In particular, sediments with sandy characteristics offer higher resistances than clayey ones, while an excessive presence of marble can compromise the cohesion of the material. The results demonstrate the potential of industrial waste for the production of low environmental impact building materials, contributing to the transition towards a more sustainable building model.
2023
VALORIZATION OF INDUSTRIAL WASTE INTO SUSTAINABLE BUILDING MATERIALS: CEMENT CONGLOMERATES BASED ON MARBLE SCRAPS
La presente tesi si concentra sulla valorizzazione degli scarti industriali – in particolare: sfridi di marmo e sedimenti dragati da bacini idrici – per sviluppare conglomerati cementizi sostenibili. Successivamente alla caratterizzazione dei rifiuti oggetto di sperimentazione, sono stati sviluppati mix design sperimentali con sostituzione (parziale o totale) degli aggregati. Le analisi reologiche, le prove di resistenza a flessione e compressione e le indagini microstrutturali hanno evidenziato che, con un’ottimizzazione dei dosaggi, è possibile ottenere malte con buone prestazioni meccaniche. In particolare, i sedimenti con caratteristiche sabbiose offrono resistenze superiori rispetto a quelli argillosi, mentre un’eccessiva presenza di marmettola può compromettere la coesione del materiale. I risultati dimostrano il potenziale dei rifiuti industriali per la realizzazione di materiali da costruzione a basso impatto ambientale, contribuendo alla transizione verso un modello edilizio più sostenibile.
File in questo prodotto:
File Dimensione Formato  
TESI_ANGARANO_GIUSEPPE_590972.pdf

File consultabile da postazioni biblioteca

Descrizione: Tesi di Laurea in materiali innovativi per l'edilizia di Giuseppe Angarano matricola 590792
Dimensione 11.79 MB
Formato Adobe PDF
11.79 MB Adobe PDF

I documenti in UNITESI sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14253/86705