This thesis reports the results of a research work aimed at the application of alumina nanofluids to improve efficiency in heat exchangers. The alumina nanofluid increases the Nusselt number and therefore increases the heat transfer coefficient of shell and tube heat exchangers. One of the drawback to increase the capacity of different industries is the lack of response of heat devices in higher capacities. Increasing capacity leads to an increase in pressure drop and this is one of the most important restrictions on the large industries. In this research, firstly a review of nanofluids studies and introduction of nanofluids is presented, then their simulation methods are investigated, and finally, studies on the used tubes in the double-tube heat exchangers.
Il presente elaborato riporta i risultati di un lavoro di ricerca volto all'applicazione dei nanofluidi di allumina per migliorare l'efficienza negli scambiatori di calore. Il nanofluido di allumina aumenta il numero di Nusselt e quindi aumenta il coefficiente di trasferimento del calore degli scambiatori di calore a fascio tubiero. Uno degli ostacoli all’aumento della capacità di diversi settori è la mancanza di risposta dei dispositivi termici con capacità più elevate. L’aumento della capacità porta ad un aumento della caduta di pressione e questa è una delle restrizioni più importanti per le grandi industrie. In questa ricerca viene presentata innanzitutto una rassegna degli studi sui nanofluidi e la loro introduzione, poi vengono studiati i loro metodi di simulazione e infine sono stati condotti gli studi sui tubi utilizzati negli scambiatori di calore a doppio tubo.
ANALISI DELLO SDCAMBIO TERMICO DI NANOPARTICELLE DISPERSE NEL FLUSSO DI ACQUA IN UN CONDOTTO
BRUNO, MYRIAM ELIA
2023/2024
Abstract
This thesis reports the results of a research work aimed at the application of alumina nanofluids to improve efficiency in heat exchangers. The alumina nanofluid increases the Nusselt number and therefore increases the heat transfer coefficient of shell and tube heat exchangers. One of the drawback to increase the capacity of different industries is the lack of response of heat devices in higher capacities. Increasing capacity leads to an increase in pressure drop and this is one of the most important restrictions on the large industries. In this research, firstly a review of nanofluids studies and introduction of nanofluids is presented, then their simulation methods are investigated, and finally, studies on the used tubes in the double-tube heat exchangers.I documenti in UNITESI sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/20.500.14253/86677