This thesis work is based on the implementation of a thermographic procedure for the experimental acquisition of the temperatures that develop during the Selective Laser Melting process. Different 'thin walls' have been created to vary the thickness and inclination using AISI 316L stainless steel powders on a substrate of the same material. An optimal set-up was prepared for thermographic monitoring, by means of an IR camera, which took into account the various problems associated with the control of a process that involves high temperatures and cooling rates. The thermographic data acquired during the process were subsequently processed with the aid of the Matlab R2021b software. Thanks to the implementation of specific algorithms, it was possible to carry out thermal monitoring of the process to collect information on the stability of the process and the resulting quality of the products.
Il presente lavoro di tesi si basa sull’implementazione di una procedura termografica per il rilievo sperimentale delle temperature che si sviluppano durante il processo Selective Laser Melting. Sono state realizzate diverse ‘pareti sottili’ al variare dello spessore e dell’inclinazione utilizzando delle polveri di acciaio inossidabile AISI 316L su un substrato del medesimo materiale. È stato predisposto un set-up ottimale per il monitoraggio termografico, tramite termocamera IR, che tenesse conto delle diverse problematiche connesse al controllo di un processo che coinvolge temperature e velocità di raffreddamento elevate. I dati termografici acquisiti durante il processo sono stati successivamente elaborati con l’ausilio del software Matlab R2021b. Grazie all’implementazione di algoritmi specifici, è stato possibile effettuare un monitoraggio termico del processo per raccogliere informazioni sulla stabilità dello stesso e sulla qualità risultante dei manufatti.
INDIVIDUAZIONE DELLA STRATEGIA OTTIMALE PER IL MONITORAGGIO TERMICO DEL PROCESSO DI SELECTIVE LASER MELTING (SLM) MEDIANTE CAMERA AD INFRAROSSI
TARANTINO, NICOLA
2020/2021
Abstract
This thesis work is based on the implementation of a thermographic procedure for the experimental acquisition of the temperatures that develop during the Selective Laser Melting process. Different 'thin walls' have been created to vary the thickness and inclination using AISI 316L stainless steel powders on a substrate of the same material. An optimal set-up was prepared for thermographic monitoring, by means of an IR camera, which took into account the various problems associated with the control of a process that involves high temperatures and cooling rates. The thermographic data acquired during the process were subsequently processed with the aid of the Matlab R2021b software. Thanks to the implementation of specific algorithms, it was possible to carry out thermal monitoring of the process to collect information on the stability of the process and the resulting quality of the products.| File | Dimensione | Formato | |
|---|---|---|---|
|
TARANTINO_tesi.pdf
non disponibili
Descrizione: Tesi dal titolo 'INDIVIDUAZIONE DELLA STRATEGIA OTTIMALE PER IL MONITORAGGIO TERMICO DEL PROCESSO DI SELECTIVE LASER MELTING (SLM) MEDIANTE CAMERA AD INFRAROSSI'
Dimensione
4.61 MB
Formato
Adobe PDF
|
4.61 MB | Adobe PDF |
I documenti in UNITESI sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/20.500.14253/66599