The act of approval for any production line is fundamental because it guarantees that all the operations carried out to pass from the semi-finished product to the finished piece respect the tolerances imposed by the manufacturer, guaranteeing the lowest percentage of scrap pieces possible, obviously aiming at the optimum and in the case of production of rejected pieces, the line must be able to recognize these pieces and remove them from production. Specifically, the production of GDI injectors was analyzed at Marelli Europe. In this case, production takes place starting from the semi-finished products that will be assembled, all assembly operations will be checked, if all operations give a positive result, we pass to the control of the machinery which in turn will check the injectors one last time before be sent to the buyer, when everything is tested, the final approval report is drawn up which certifies the correct operation of the line, then starts with the actual production.
L'atto di benestare per una qualsiasi linea di produzione è fondamentale perchè garantisce che tutte le operazioni svolte per passare dal semilavorato al pezzo finito rispettino le tolleranze imposte dal costruttore, andando a garantire una percentuale di pezzi scarto più bassa possibile puntando ovviamente all'ottimo e in caso di produzione di pezzi scarto la linea dev'essere in grado di riconoscere tali pezzi e allontanarli dalla produzione. Nello specifico si è analizzata la produzione di iniettori GDI presso la Marelli Europe. In questo caso, si ha la produzione partendo da dei semilavorati che verranno assemblati, tutte le operazioni di assemblaggio verranno controllate, se tutte le operazioni danno esito positivo si passa al controllo del macchinario che a sua volta controllerà gli iniettori un'ultima volta prima di essere mandati all'acquirente,quando tutto sarà testato si redige la relazione finale di benestare che certifica il corretto funzionamento della linea,quindi partire con la produzione effettiva.
BENESTARE PER PRODUZIONE DI INIETTORI GDI
SCOLAMACCHIA, DAVIDE
2019/2020
Abstract
The act of approval for any production line is fundamental because it guarantees that all the operations carried out to pass from the semi-finished product to the finished piece respect the tolerances imposed by the manufacturer, guaranteeing the lowest percentage of scrap pieces possible, obviously aiming at the optimum and in the case of production of rejected pieces, the line must be able to recognize these pieces and remove them from production. Specifically, the production of GDI injectors was analyzed at Marelli Europe. In this case, production takes place starting from the semi-finished products that will be assembled, all assembly operations will be checked, if all operations give a positive result, we pass to the control of the machinery which in turn will check the injectors one last time before be sent to the buyer, when everything is tested, the final approval report is drawn up which certifies the correct operation of the line, then starts with the actual production.I documenti in UNITESI sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/20.500.14253/110037